Behringer B-Control Fader BCF2000 Uživatelský manuál stáhnout pdf (Strana 2)

2 | OVERVIEW

Hardware setup

You can use the Behringer BCF2000 with ACID after you have installed the appropriate USB driver, firmware, firmware

update utility, and BCFview virtual display from the Behringer Web site at http://www.behringer.com/.

First open and run the USB MIDI driver .zip file (v1.1.1.1) for BCF2000.

Open and run the BCF2000 Version 1.10 firmware .zip file.

Open and run the firmware update utility .zip file.

Turn off the Behringer BCF2000 and turn it back on after a few seconds. The LCD display should quickly flash 1.10 to

indicate that the firmware has successfully installed. Then the LCD display should read P-1.

If P-1 is not displayed, turn off the Behringer BCF2000. Press and hold the first push button in the top row of buttons

(under the first knob) and turn the unit back on. The LCD display should now read P-1.

Plug the USB cable into the back of the Behringer BCF2000 and into your computer’s USB port.

Press and hold the Edit button and press the Store button at the same time. The LCD display should read EG (edit

global mode).

Turn the first rotary encoder (labeled Type on the Behringer unit) clockwise slightly until the LCD displays U-1. U-1

indicates USB mode. In the LCD display, U-1 will flash for just a moment and then read EG again.

Press the Exit button to exit the edit global (EG) mode. The LCD display should read P-1.

Turn off the Behringer BCF2000.

10.

Press and hold the second push button in the top row of buttons (under the channel knobs) and turn the unit back

on. The LCD should now display NC C (Mackie® Control for Cubase).

11.

Open and run the BCFview virtual display for BCF2000.

12.

Right-click the virtual display and choose BCF2000.

Note:

After installing the MIDI driver, the B-Control Rotary/Fader 2000 (12/23/2004,1.1.1.1) will be visible under

Sound, video and game controllers in your system’s Device Manager.

Note:

In addition to USB mode, you can also use the Behringer BCF2000 in MIDI mode. For more information about

MIDI connections, refer to the documentation on the Behringer Web site at http://www.behringer.com/.

1 2 3 4 5 6 7 8 9

Žádné komentáře

Behringer B-Control Fader BCF2000 Uživatelský manuál Strana 2